Falcon Elite Hotswap TKL with USB-C Bluetooth and RGB Mechanical

*Note: Keycaps and switches in pictures not included in kit.
*Switches do not need soldering- simply push them into hotswap PCB
The Falcon Elite is a fully customizable tenkeyless keyboard made for portability. The keyboard has dual bluetooth/wired connectivity, RGB backlighting, USB-C wired connection, and a hotswappable PCB. The USB-C cable is detachable for convenience of portability. Stabilizers come pre-installed. The hotswap PCB allows for installation of any MX type switch without the need for soldering so that you can choose whichever switches you like and install them by hand. Features:

Dual function connectivity - can be used over bluetooth or wired USB-C cable

2000 mAh battery

Hotswap PCB can take all MX type switches without any need to solder them in

Foam padded case interior for more pleasant sound

Roller wheel to adjust RGB LED brightness and media volume

RGB in-switch backlighting

USB passthrough port to connect other peripherals or charging cables

Legs under keyboard can be flipped out for higher angle or tucked inside the board for lower angle operation

Reprogrammable keymap using PC companion software

*Download companion software for PC by searching for:

Falcon Elite Keyboard Companion Software

Note: Software language may need to be changed from Chinese to English when used for the first time by clicking the Settings icon at the top right after opening program.

Same functionality as the Rakk Lam-Ang Pro keyboard

Instruction Manual, search for: Falcon Elite Instruction Manual

Kit comes with:

Falcon Elite keyboard case with hotswap PCB and stablizers (battery included for use over bluetooth)

Switch puller

Plastic keycap puller

USB C cable

Kit requires:

87 MX type switches

87 keycaps - all 104 key standard keycap sets can be used to fill this board. Refer to product pics for keycap sizing.

To connect the keyboard to devices over bluetooth:

Turn the switch on the back of the board to the "ON" position.

Press "FN" + "Tab", after which you will see the blue LED blink a few times.

Press "FN" + either Q/W/E to select which of the three bluetooth profiles you wish to save the connection to.

Press and hold "FN" + "P" to have the keyboard broadcast a bluetooth signal. Set the device you wish to connect to search for Bluetooth devices, and the keyboard will appear as an available device to connect to.

Returns Accepted for this item if it's within 30 Days